Replacing memory
6. If two SO-DIMMs are already installed in the memory slot, remove one
7. With the notched end of the SO-DIMM toward the contact edge side of
38
®
ThinkPad
T60 Service and Troubleshooting Guide
of them to make room for the new one by pressing out on the latches on
both edges of the socket at the same time. Be sure to save the old
SO-DIMM for future use.
the socket, firmly insert the SO-DIMM into the socket at an angle of
about 20 degrees 1 ; then pivot it downward until it snaps into place
2 .
2
1
1
2