IBM THINKPAD T60 - SERVICE AND Service And Troubleshooting Manual page 34

Starting BIOS Setup Utility
1. To protect yourself against accidental loss of data, back up your data and
computer registry. For details see the "Data backup-and-restore tools"
section of Access Help.
2. If the diskette drive is connected to the computer, remove any diskette
from the diskette drive, and then turn off the computer.
3. Turn on the computer; then, while the message, "To interrupt normal
startup, press the blue ThinkVantage button" is displayed at the lower left
of the screen, press the ThinkVantage button. The Rescue and Recovery
workspace opens.
4. Click Access BIOS. The System Restart Required window is displayed.
5. Click Yes. The computer restarts, and the BIOS Setup Utility menu
appears.
If you have set a supervisor password, the BIOS Setup Utility menu
appears after you enter the password. You can start the utility by pressing
Enter instead of entering the supervisor password; however, you cannot
change the parameters that are protected by the supervisor password. For
more information, see the on-board help.
6. Using the cursor keys, move to an item you want to change. When the
item you want is highlighted, press Enter. A submenu is displayed.
7. Change the items you wish to change. To change the value of an item, use
the F5 or F6 key. If the item has a submenu, you can display it by pressing
Enter.
8. Press F3 or Esc to exit from the submenu. If you are in a nested submenu,
press Esc repeatedly until you reach the BIOS Setup Utility menu.
Note: If you need to restore the settings to their original state as of the
time of purchase, press F9 key to load the default settings. You can also
select an option in the Restart submenu to load the default settings or
discard the changes.
9. Select Restart; then press Enter. Move the cursor to the option you want
for restarting your computer; then press Enter. Your computer restarts.
26
®
ThinkPad T60 Service and Troubleshooting Guide