Nic Indicator Codes - Dell PowerVault NX3600 Owner's Manual

Item Indicator, Button, or
Connector
14 Service action button
15 Video connector
16 USB connectors (2)
17 Serial COM port (mini USB
connector)
18 PSU indicator

NIC Indicator Codes

Figure 4. NIC Indicator
1. link indicator
2. activity indicator
Indicator
Link and activity indicators are off The NIC is not connected to the network.
Link indicator is green
Link indicator is amber
Activity indicator is blinking green Network data is being sent or received.
8
Icon Description
Used to troubleshoot certain errors. This button can be
pressed using the end of a paper clip.
Allows you to connect a VGA display to the system.
Allows you to connect USB devices to the system. The
ports are USB 2.0-compliant.
Allows you to connect a serial device to the system.
Indicates whether power is present or whether a power
fault has occurred.
Indicator Code
The NIC is connected to a valid network at its maximum port speed (1 Gbps or 10
Gbps).
The NIC is connected to a valid network at less than its maximum port speed.
NOTE: You must press and hold the button for ten
seconds to generate an SCI interrupt.
NOTE: Use this button only if directed to do so by
qualified support personnel.
NOTE: This connector is for service only. Connect to
this connector only if asked to do so by Dell support.