Power Led Indicator Codes; Status Led Indicator Codes; Cache Activity Led Indicator Codes; Other Information You May Need - Dell PowerVault NX3600 Owner's Manual

Power LED Indicator Codes

Indicator
Off
Solid green

Status LED Indicator Codes

Indicator
Off
Blinking amber

Cache Activity LED Indicator Codes

The cache activity LED lights when the storage controller contains cache and when the cache is being transferred from
the memory to the hard drive.
Indicator Indicator Codes
Off Indicates that there is no write data in the cache. It is safe to remove the controller when the cache
activity LED is off.
Solid green Indicates that it is safe to remove the controller without loss of cached data. It is safe to remove one
controller but not both the controllers.
Flashes amber Indicates that cache is being transferred from the memory to the hard drive (moving from mirroring
mode to journaling mode).
CAUTION: Removing the controller from the NAS appliance when the cache LED indicator is
flashing amber causes loss of data.

Other Information You May Need

WARNING: See the safety and regulatory information that shipped with your system. Warranty information may be
included within this document or as a separate document.
Getting Started Guide provides an overview of setting up your system and technical specifications.
• The
• The rack documentation included with your rack solution describes how to install your system into a rack, if
required.
Administrator's Guide provides an overview of the tasks that must be completed to configure the NAS
• The
manager.
• The Deployment Guide provides information on hardware deployment and the initial deployment of the NAS
appliance.
System Placemat provides information on how to rack your system.
• The
• Any media that ships with your system that provides documentation and tools for configuring and managing your
system, including those pertaining to the operating system, system management software, system updates, and
system components that you purchased with your system.
Description
Indicates that no power is available to the fan.
Indicates that the power is on.
Description
Indicates normal operating state.
Indicates system fault or error condition.
13