Installing A Pen Cord - Fujitsu FPCM35351 User Manual

Using the Tablet PC
1
1
1
► Replace the pen tip with one of the spare tips supplied.
Insert the flat end of the tip into the barrel and push it in firmly until it is in place.
i
If the tip is worn or damaged, discard it.

Installing a pen cord

You can attach the pen with a pen cord to prevent accidentally dropping it or losing it.
► Attach the end of the pen cord with the smaller loop to your pen.
► Attach the end of the pen cord with the larger loop to your notebook.
32
► To remove the tip; position the tip in the
gap between the two ends of the tool.
► Pinch the two ends of the tip changer
together so that the tip is firmly
clasped (1), then pull it from the barrel.
A26391-K279-Z220-1-7619, edition 1