Installing A Pen Tether - Fujitsu LifeBook T902 User Manual

.

Installing a Pen Tether

To prevent dropping or losing your pen, you should attach it
to your system using the pen tether that is included with the
system.
To attach the pen tether to your Tablet PC, perform the
following steps:
Attach the end of the pen tether with the smaller loop to
1
your pen. To do so, push the end of the tether through
the hole in the pen, then thread the opposite end of the
tether through the loop.
Attach the end of the pen tether with the larger loop to
2
the attachment point on your tablet. To do so, insert the
end of the pen tether through the attachment point,
then feed the pen through the large loop in the tether.
45 - Touchpad/Active Digitizer/Touchscreen
Figure 32. Installing a Pen Tether