Or
►
Press the front of the rocker button (facing toward the pen tip) and simultaneously touch the
corresponding position with the pen tip.
Moving the cursor
►
Hold the pen tip less than 1/8 inch (3-5 mm) from the screen and move the pen.
Setting the pen
Windows XP
Under Fujitsu Pen Settings or Tablet and Pen Settingsin the Control Panel you can change various settings
for the pen (pressure sensitivity, assignment and function of the rocker button).
Windows Vista
Under Start symbol – (Settings) - Control Panel – Mobile PC – Pen Settings or Tablet PC Settings in the
Control Panel you can change various settings for the pen (pressure sensitivity, assignment and
function of the rocker button).
Calibrating the pen
Before using the pen for the first time, you should calibrate it so that the cursor follows the
movements of the pen as accurately as possible. You should also always repeat the calibration if the
co-ordination between the pen and cursor movement deteriorates.
Windows XP
To calibrate, run the Tablet and Pen Settings function in the Control Panel. You need to calibrate both
portrait and landscape formats.
Windows Vista
To calibrate, run the Tablet PC Settings function in the Control Panel. You need to calibrate both
portrait and landscape formats.
Replacing the pen tip
With use, the pen tip may become worn or may pick up foreign particles that can scratch the screen.
A damaged or worn tip may not move freely, causing unpredictable results when using the pen.
If your pen exhibits these problems, you should replace the pen tip. To do so, use the pen tip
removal tool included with your pen.
A26391-K279-Z220-1-7619, edition 1
Using the Tablet PC
31