Disconnect-Reconnect Page 02H - HP 2600fx - Optical Disk Drive Command Reference Manual

Disconnect-Reconnect Page 02H

Table 2-52 Disconnect-Reconnect Page 02H
The disconnect-reconnect page provides the initiator the means to tune
the performance of the SCSI bus.
PS
Buffer Full
Ratio
Buffer Empty
Ratio
Maximum
Burst Size
Chapter 2
Byte 7 6
0 PS Rsvd
(1) (0)
1
2
3
4-9
10
11
12-15
The Parameters Savable bit of 1 indicates this
parameter page is savable in non-volatile RAM.
This field has no effect on the drive.
This field has no effect on the drive.
This field indicates the maximum amount of data that
the target transfers during a data phase before
disconnecting if the initiator has granted the disconnect
privilege. This value is expressed in increments of 512
bytes (e.g. a value of one means 512 bytes, two means
1024 bytes, etc.). A value of zero indicates there is no
limit on the amount of data transferred per connection.
Mode Sense (Group 0) Command (1AH)
5 4 3
Page Code (02H)
Page Length (0EH)
Buffer Full Ratio
Buffer Empty Ratio
Reserved (0)
Maximum Burst Size (MSByte)
Maximum Burst Size (LSByte)
Reserved (0)
SCSI-2 Drive Command Set
2 1 0
2-59