Move Success Log Table Format; Table 3-51. Move Success Log Table Format; Table 3-52 Move Success Logs Entry Format - HP 2600fx - Optical Disk Drive Command Reference Manual

Move Success Log Table Format

This log is ONLY supported on the 40fx and 80ex models.
NOTE
This table can be accessed via the Log Sense Command (4DH),
Table 3-45 on page 3-47 with page code 31H. The Move Success Log is
intended for use during normal jukebox operation, not diagnostic
operation.
Move totals and the ten most recent hard errors are recorded.
Table 3-51 Move Success Log Table Format (For 40fx, 80ex, 125ex and 220mx
models ONLY)
Hard errors are unrecoverable and generate a hardware error code. Soft
NOTE
errors are recoverable with normal operation continuing after recovery.
Table 3-52 Move Success Logs Entry Format
Chapter 3
Byte
0 Page Code 31H
1 Reserved = 0
2-3 Number of bytes to follow
4 Current entry number (range 1 - 10)
5 Number of entries in the log
6-9 Total number of good moves since last hard error
10-11 Total number of soft errors since last hard error
12-71 Array of 10 entries, one entry per hard error (Table 3-52 on
page 3-53
Byte
0-3 Current Good Move Count at time of hard error
4-5 Current Recovery Count at time of hard error
Jukebox SCSI-2 Command Set
Log Sense Command (4DH)
Description
Description
3-53