Table 3-7 Sense Key - Additional Sense Length Values - HP 2600fx - Optical Disk Drive Command Reference Manual

Table 3-7
Jukebox SCSI-2 Command Set
Request Sense Command (03H)
Sense Key - Additional Sense Length Values
Sense Key
0H No Sense
1H Recovered Error
2H Not Ready
4H Hardware Error
5H Illegal Request
6H Unit Attention
BH Aborted Command
Information Contains the Element address in question on an Illegal
Request during a 21H or 3BH sense code.
Additional Sense
Code The Additional Sense Code specifies detailed
information related to the error reported in the Sense
Key field. See Table B-2 on page B-4.
Additional Sense
Code Qualifier The Additional Sense Code Qualifier specifies detailed
information related to the Additional Sense Code. See
Table B-2 on page B-4.
SKSV When set to 1, the Sense Key Specific bytes contains
valid data. When set to 0, Bytes 15, 16, and 17 are zero.
Sense Key
Specific When the Sense Key field is set to Illegal Request (05H)
and SKSV is 1, the Sense Key Specific fields are defined
as shown in Table 3-8 on page 3-11.
Additional Sense
Bytes This field may contain information when the Additional
Sense Length field contains a value greater than 10. See
Table B-5 on page B-8 and Table B-6 on page B-14.
3-10
Description Additional Sense
Length
10
70
10
70
10
10
10
Chapter 3