Table 3-46 Log Sense Parameter Data Available In Each Page - HP 2600fx - Optical Disk Drive Command Reference Manual

Table 3-46
Page
Code
0
30H
31H
32H
33H
34H
35H
36H
37H
38H
39H
3AH
3BH
3CH
3DH
a. This column ONLY applies to the 40fx, 80ex, 125ex and 220mx.
b. This column applies to all models, EXCEPT 40fx, 80ex, 125ex and 220mx.
c. If "NS" appears in this field, the log is not supported for all models, EXCEPT
40fx, 80ex, 125ex and 220mx.
d. The length of the drive log depends on the number of drives in the unit. Ten
bytes per drive are available.
Jukebox SCSI-2 Command Set
Log Sense Command (4DH)
Log Sense Parameter Data Available in Each Page
Length Length
a
Bytes
Bytes
16 16
510 366
72
NS
varied NS
406 366
204 204
14-44 24-44
6 NS
24 24
116 366
108 NS
52 NS
72 164-340
8 8
204 NS
All log pages are preceded by a 4-byte header that contains the page
number, a reserved byte, and the length of the data to follow the header.
(Refer to the following example.)
3-48
b
List of supported pages
Error log (Table 3-47 on page 3-49)
c Move Success log (Table 3-51 on page 3-53)
Force log (Table 3-53 on page 3-54)
Recovery log (Table 3-54 on page 3-55)
Regression (vendor unique)
d
Drive log (Table 3-58 on page 3-57)
Byte 0 = Version #; Byte 1 = Revision #
The Odometer log (Table 3-60 on page 3-58)
Run-Time log (Table 3-61 on page 3-59)
Retry log (Table 3-64 on page 3-61)
Move History log (Table 3-66 on page 3-63)
Mechanism Parameters (factory use only)
PROM Information (factory use only)
Alternate Regression (factory use only)
Description
Chapter 3