Reading A System Error Message; Viewing System Error Messages From Advanced Web Tools; Displaying The Error Log Without Page Breaks - HP StorageWorks 16-EL - SAN Switch Reference Manual

Reading a System Error Message

This section explains how to read system error messages. Typically, system error
messages are generated by the various modules in the Fabric OS. They are
dumped in the System Error Log and, depending on severity, may be saved to
memory or to flash memory.

Viewing System Error Messages from Advanced Web Tools

To view the System Error Log for a switch from Advanced Web Tools:
1. Launch Advanced Web Tools.
2. Select the desired switch from the Fabric Tree.
3. Select the Switch Events button from the Switch View.
4. View the switch events and messages.

Displaying the Error Log without Page Breaks

To display the Switch Error Log without page breaks:
1. Log in to the switch as the admin user.
2. Enter the errdump command at the command line.
Diagnostic and System Error Messages Version 3.1.x Reference Guide
The Switch View appears.
A Switch Events Report appears.
An error log, similar to that shown in
Introduction to System Error Messages
Figure 1, displays.
19