Adding Rollover Images - Adobe CAPTIVATE 2-USING CAPTIVATE Use Manual

The following options are on the Size and Position tab:
Position in pixels
the arrows, for the left and top positions.
Size in pixels
type the number or use the arrows to change the number upward or downward.
Constrain proportions
Use the Settings menu to select how to apply property changes in the project. To apply all your
7.
changes, select Apply only changed properties. To apply all image settings, select Apply all
properties. You can apply the image settings to the current slide only or to all slides.
Note: If you change the settings in this dialog box, they become the default settings and any new
images you create use the new settings.
Click the Apply to all button to apply the settings specified from the Settings menu.
8.
Click OK.
9.
Tip: You can create a watermark image using a transparency trick. Just insert an image and set the
transparency to 50%. This works very well with many company logos.

Adding rollover images

Rollover images are unique. They consist of an image and a rollover area (the "hot" area). Rollover
images appear when the end user moves the mouse over the hot area at runtime. They are useful
for heavily detailed slides or for slides that contain buttons or toolbars that require explanation.
You can use the same type of graphics for rollover images that you use for traditional images. You
can also customize the location, outline, and size of the rollover area for rollover images.
To add a rollover image:
Open an Adobe Captivate project.
1.
In Storyboard view, double-click the slide to which you want to add a rollover image.
2.
From the Insert menu, select Rollover Image.
3.
The Open dialog box appears.
Select an image from the list or browse to a new location for a different image. Click Open.
4.
The New Rollover Image dialog box appears.
(Optional) You might be asked if you want to crop or rescale the image.
5.
Crop This option centers the image and crops the edges of the image that do not fit into the
capture size area.
Rescale This option resizes the image to provide a good-quality resized image that fits the
capture size area.
The image is added to the project.
Set the position of the image on the slide by entering a number or using
Set the size of the image by entering the value for height and width. You can
Select this option to lock the image proportion.
Adding rollover images 109