Src2 Remote Control With Rnet Controller - Russound ST2 Installation Manual

Smart tuner dual am/fm tuner
Hide thumbs Also See for ST2:
Table of Contents

Advertisement

SRC2 Remote Control Operation
Turning the unit on
The tuner is power managed by the RNET-enabled
controller. If the tuner is in standby mode, any button
press of the SRC2 will bring the tuner out of standby
mode when used with the UNO keypad.
Selecting the tuner
To select a tuner, push
is selected, or use the numeric source inputs at the
bottom of the SRC2.
Selecting the desired band
Push
to toggle between AM/FM reception.
Selecting the desired frequency
Use the Channel
and
for manual tuning. To move quickly through the sta-
tions, press and hold the button for more than 1.5
seconds. To directly select a station, enter the three-
or four-digit channel or frequency (1071 for 107.1,
etc.). European regions use five-digit station frequen-
cies.
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select
higher frequency station press
lower frequencies. Tuning begins at the current fre-
quency, seeks upward (or downward) and stops at the
next tuned station. Pushing
tinues the SEEK function. Once the highest frequency

SRC2 REMOTE CONTROL WITH RNET CONTROLLER

until the desired tuner
or
and
or
or
. To seek
. Press
for
or
again con-
ST2 OPERATION
is reached, the tuner continues SEEK mode at the
lowest frequency.
Frequency Scan
To scan, press and hold then release
tuner scans through tuned stations with a 5-second
preview before moving to the next station. To end
scanning, press
again.
Bank/Memory Presets
The AM/FM tuner has six banks of preset memory
settings, and each bank holds six presets for a total
of 36 possible presets.
Selecting a Bank
To select a bank, press and hold
or
for bank down.
Saving a Memory Preset
Press and hold numeric buttons (1-6) for saving mem-
ory presets.
Recalling a Memory Preset
Press
and
to scroll through a loop dis-
play of all the configured memory presets for the cur-
rently selected bank. Only configured presets will be
displayed.
Mute
Press the
button to mute/unmute the tuner
audio output.
. The
for bank up
19

Advertisement

Table of Contents
loading

This manual is also suitable for:

St2-eu

Table of Contents