Uno-Lrc1 Remote Control With Cav6.6 - Russound ST2 Instruction Manual

Smart tuner dual am/fm tuner
Hide thumbs Also See for ST2:
Table of Contents

Advertisement

UNO-LRC1 Remote Control
Operation
Turning the unit on
The tuner is power managed by the CAV6.6 or other
RNET-enabled controller. If the tuner is in standby
mode, any button press of the UNO-LRC1 will bring
the tuner out of standby mode.
Selecting the desired tuner
To select a tuner, push
number preassigned to Tuner 1 or Tuner 2, or use the
numeric source inputs at the bottom of the
UNO-LRC1.
Selecting the desired band
Push
to toggle between AM band and FM band
reception.
Selecting the desired frequency
Use the Channel
and
To move quickly through the channels, press and hold
either of the Channel buttons for more than 1.5 sec-
onds. The Select
the same manner.
To directly select a station, press the three- or four-
digit station frequency (1071 for 107.1, etc.).
European regions use five-digit station frequencies.
Frequency Seek
The SEEK function is performed by pressing and
releasing the Select
frequency station press Select

UNO-LRC1 REMOTE CONTROL WITH CAV6.6

and choose the source
for manual tuning.
and
can be used in
or
. To seek higher
, and press
Select
for lower frequencies. Select
begins at the current frequency, seeks upward and
stops at the next tuned station. Pushing the Select
again continues the SEEK function. Once the
highest frequency is reached, the tuner continues in
SEEK mode at the lowest frequency.
Frequency Scan
To scan, press and hold then release
tuner scans through tuned stations with a 5-second
preview before moving to the next station. To end
scanning, press
again.
Selecting a Bank
To select a bank, press and hold
or
for bank down. The bank's name will be
temporarily displayed on the UNO-S2.
Recalling a Memory Preset
Press the
and
memory presets for the selected bank. This proce-
dure will step through all of the presets in the current
bank, then loop back to start at the first one. Only
configured presets will be displayed.
Mute
Press the
button to mute/unmute the tuner
audio output.
ST2 OPERATION
. The
for bank up
to scroll through the
tuning
17

Advertisement

Table of Contents
loading

This manual is also suitable for:

St2 rev 1

Table of Contents