Region; Backup And Restore - Russound ST2 Installation Manual

ST2 TUNER PROGRAMMING
ST2 TUNER SETUP MENU
Bank Name (AM/FM) (cont'd)
14. Press BAND to save bank name. The Bank
Name menu returns to the Tuner # prompt to
name other banks, or press TNR SEL to exit the
Bank Name menu.
Region (AM/FM)
The Region procedure assigns either US or Euro
to the tuner. The difference between the two is
that US FM frequencies operate in .2 MHz incre-
ments, while European FM frequencies operate in
.05 MHz increments.
(END OF AM/FM TUNER SETUP)
Press TNR SEL
button to select
AM/FM Tuner
TNR TNR
SEL SEL
TUNER
SETUP
Menu
TNR
SEL
MEM
NAME
Procedure
TNR
SEL
BANK #
24
AM/FM Setup Menu
SOURCE
UPDATE FACTORY
NUM FIRMW INIT
Procedure
Procedure Procedure
MEMORY
MEMORY #
NAME
Selects
character
Selects
character
position
Repeat
for each
character
in name
SAVE
CHANGES?

Backup and Restore

Once the tuner settings are completed, it may be
advisable to create a backup of the programmed
settings for future use. The backup will then be
available in case tuner settings need to be
restored.The backup and restore PC application
"RNET Backup" is available through the
Document Center at www.russound.com . Also
required are a DB9 male-to-female cable and lap-
top or desktop PC.
Chassis
SYSTEM
INFO Setup
Procedure
Menu
BANK
Procedure
NAME
Procedure
TNR
SEL
SAVE
BANK
BANK #
CHANGES?
NAME
Selects
character
Selects
character
position
Repeat
for each
character
in name
AM/FM

REGION

Setup
Menu