Replacing the Chassis Cover
Turn the chassis so that the rear panel faces you, and reinstall the three mounting screws. (See
Step 9
Figure
Figure B-18 Replacing the Redundant Power Supply Mounting Screws
Mounting
screws
Replace the chassis cover using the procedures in the following section,
Step 10
Replacing the Chassis Cover
To replace the chassis cover, follow these steps:
Place the chassis bottom so that the front panel is facing you.
Step 1
Hold the chassis cover over the chassis bottom, and align each of the cover tabs with the chassis tabs at
Step 2
the top rear of the chassis. (See
Cisco AS5400 Universal Gateway Chassis Installation Guide
B-18
B-18.)
AC OK
DC OK
OTF
AC OK
DC OK
OTF
Power supply
Figure
B-19.)
Appendix B
Replacing the Power Supply
"Replacing the Chassis Cover"
OL-2847-02 0A