Appendix; Cabling Specifications; Console And Auxiliary Port Cables And Pinouts - Cisco AS5400HPX Installation Manual

Cabling Specifications

This appendix provides the following cabling and pinout information for the Cisco AS5400 and
Cisco AS5400HPX universal gateways:
•
•
•
•
•
This appendix specifies pinouts only for the pins used. Pins not listed in the tables in this
Note
appendix are not connected.
Note Unless specifically noted, all references to the Cisco AS5400 also apply to the
Cisco AS5400HPX.

Console and Auxiliary Port Cables and Pinouts

The universal gateway arrives with a console and auxiliary cable kit, which contains the cable and
adapters you need to connect a console (an ASCII terminal or PC running terminal emulation software)
or modem to your universal gateway. The console and auxiliary cable kit includes:
•
•
•
•
For console connections, proceed to the section
modem connections, proceed to the section
OL-2847-02 0A
Console and Auxiliary Port Cables and Pinouts, page C-1
Ethernet Port Pinouts, page C-4
BITS Cable and Port Pinouts, page C-5
Alarm Port Pinouts, page C-5
Bantam Jack Port Pinouts, page C-6
RJ-45-to-RJ-45 rollover cable. (See the next section,
information.)
RJ-45-to-DB-9 female DTE adapter (labeled TERMINAL).
RJ-45-to-DB-25 female DTE adapter (labeled TERMINAL).
RJ-45-to-DB-25 male DCE adapter (labeled MODEM).
A P P E N D I X
"Identifying a Rollover
"Console Port Cables and
"Auxiliary Port Signals and
Cisco AS5400 Universal Gateway Chassis Installation Guide
C
Cable," for more
Pinouts" on page C-2. For
Pinouts" on page C-4.
C-1