Table of Contents
Advertisement
Menu Screen
When KY-F560 camera is mounted on this unit, new menu screens and menu items are
added to the original KY-F560 menu screen.
The additional new menu screens and menu items will be explained here.
Please refer to KY-F560 instruction manual for details on menu screen setting.
"SYSTEM" Menu Screen
The following additional items are added to the "SYSTEM" menu screen.
The settings in bold are factory settings.
Item
"OUTPUT"
"SYNC ON G"
From RM multi-pin connector, besides the composite signal, an-
other type of output video signal could be outputted. The addi-
tional output signal is selected here.
"Y/Cb/Cr" : Y/Cb/Cr component signal will be outputted.
"RGB"
: RGB component signal will be outputted.
Option to superimpose SYNC signal onto the G signal
could be selected under the item "SYNC ON G".
"Y/C"
: YC separate signal will be outputted.
Option to superimpose SYNC signal onto the G signal of the RGB
component signal is selected here.
This item could only be set when "RGB" has been selected under
the "OUTPUT" item.
"ON"
: SYNC signal will be superimposed.
"OFF"
: SYNC signal will not be superimposed.
Function/Variables
21
Advertisement
Table of Contents
