Table of Contents
Advertisement
Connecting RM-P210
Notes to be taken when operating RM-P210
When using RM-P210 menu to carry out the setting of KY-F560, some items of RM-P210
menu setting may not be consistent with the operations of KY-F560.
RM-P210 Menu
No
Item
Variable Value
4G
"PROCESS"
10
screen
"KNEE POINT"
NORMAL
(KNEE POINT setting
–10
when AUTO KNEE is
off)
4K
"GAMMA LEVEL"
10
(GAMMA
CURVE
NORMAL
Correction)
–10
5B
"OPERATION"
0.1 dB
screen
1.0 dB
"V. GAIN STEP"
(VARIABLE GAIN
STEP SETTING)
20
Operation of KY-F560
KNEE point may vary as follows:
NORMAL : 100 % (Maximum level)
–10
: 80 % (Minimum level)
Level will change by 5 % with every
2-step adjustment on the minus side.
Setting the plus side (1 to 10) will not
change the KNEE point.
Level will change (switch to next level)
with every 2-step adjustment.
(–5 ~NORMAL ~5)
With 0.1 dB setting, turning of RM-
P210 [VARIABLE GAIN] knob will
cause the gain level to change at 0.2
dB step.
With 1.0 dB setting, gain level will
change at 1.0 dB step.
Menu Screen
When KY-F560 camera is mounted on this unit, new menu screens and menu items are
added to the original KY-F560 menu screen.
The additional new menu screens and menu items will be explained here.
Please refer to KY-F560 instruction manual for details on menu screen setting.
"SYSTEM" Menu Screen
The following additional items are added to the "SYSTEM" menu screen.
The settings in bold are factory settings.
Item
From RM multi-pin connector, besides the composite signal, an-
"OUTPUT"
other type of output video signal could be outputted. The addi-
tional output signal is selected here.
"Y/Cb/Cr" : Y/Cb/Cr component signal will be outputted.
"RGB"
: RGB component signal will be outputted.
Option to superimpose SYNC signal onto the G signal
could be selected under the item "SYNC ON G".
"Y/C"
: YC separate signal will be outputted.
Option to superimpose SYNC signal onto the G signal of the RGB
"SYNC ON G"
component signal is selected here.
This item could only be set when "RGB" has been selected under
the "OUTPUT" item.
"ON"
: SYNC signal will be superimposed.
"OFF"
: SYNC signal will not be superimposed.
Function/Variables
21
Advertisement
Chapters
Table of Contents
