Searching For Motion - Bosch DB24C4200R2 Operation Manual

76 en | Operation - Playback Mode
7.3

Searching for Motion

Selected image window > Search for motion menu
You can check the image in the selected image window for
motion. It is only possible to search for motion with locally
connected cameras and not with IP cameras.
1.
2.
3.
4.
5.
6.
F.01U.033.372 | V5 | 2009.09
Select the image window of the camera whose images you
want to check for motion. The image window now has a
yellow border.
Using the hairline, highlight the time period on the
timeline.
Select the Selected image window > Search for motion
menu or click the
The current hairline value in the timeline is copied to the
from and to fields for the start and end time and date. If
you want to change the time period, click the down arrow
beside the from and to fields and select the new date and
time.
Select Display grid. A grid is placed above the image. Every
cell in the grid can be selected for search purposes.
Select those cells you want to check for motion. To select
an area, left-click or drag the cursor over an area while
holding down the left mouse button.
Operation Manual
icon beneath the image area.
Selected areas:
– Left-click
or
– Hold the left mouse
button down and drag an
area.
A plus sign appears beside the
mouse cursor to show that the
area has been selected and will
be assessed during the search.
Note: Areas selected for the
search are shown shaded.
Bosch Sicherheitssysteme GmbH
DiBos/DiBos Micro