DiBos/DiBos Micro
5
Operation - Live/Playback Mode
5.1
Displaying Incoming Alarms
Incoming alarms of cameras can be displayed automatically or
non-automatically.
5.1.1
Non-automatic Display of Incoming Alarms
When incoming alarms are received, a red flashing tab
is added to the device list. An audio signal sounds, if this has
been configured.
1.
2.
3.
Acknowledge
alarm
Delete alarm
Display all alarms
NOTICE!
The incoming alarms are saved in the logbook.
Bosch Sicherheitssysteme GmbH
Select the tab. The cameras or remote stations in alarm
status are listed. The audio signal is switched off.
Double-clicking the camera icon shows the image in the
selected window of the image area. The image can be
displayed in any window of your choice by using "Drag and
Drop".
By right-clicking the remote station icon, you can
acknowledge the alarm, delete the alarm or display all the
cameras in alarm status.
Operation Manual
Operation - Live/Playback Mode | en
Acknowledges the alarm. The flashing tab
becomes static.
Deletes the remote station from the
device list.
Displays all alarms in the image area. The
system automatically selects the best
type of display.
F.01U.033.372 | V5 | 2009.09
61