Final Cleaning Steps - Kodak i1840 User Manual

Final cleaning steps

5-14
The Count Only screen will be displayed.
5. Touch Scan.
6. Remove the transport cleaning sheet from the output tray and place
it in the center of the input elevator in landscape orientation with the
adhesive side down and touch Scan.
7. When finished, touch End Job.
NOTE: When the transport sheet gets dirty, discard it and use a new
one.
When finished running the transport cleaning sheet:
1. Open the pod.
2. Wipe the exposed side of the upper and lower imaging guides with a
lint-free cloth.
3. Close the pod and scan a test image to ensure image quality.
A-61555 May 2010