Table of Contents
Advertisement
Personalizing Your Phone
Formulating Functions
This section explains how to activate an individual function, for example call forwarding unconditional,
with the aid of function commands and how to assign it to a key.
Function under a Foxkey
You want to know the status of a function stored under the Foxkey.
Certain functions are shown with a check mark on the display when the function is activated:
• T visible to the left of the function name: Function is activated.
• T not visible: Function is deactivated.
Function Commands
You can use function commands to define a function to suit your personal requirements. A function can
consist of one or more function commands, function codes, and the phone number. You can either carry
out a function directly or store it under a key (select function "configurable").
The following function commands are available (see "Entering characters"):
"I"
"X"
"P"
"N"
"."
"Z"
"R"
"Y"
Examples of how to define a function:
"IR"
"I201"
"I*21201X"
Note
58
Seize line
Disconnect
Pause 1 second before the next operation
Use the phone number entered in call preparation
Control key function
Activate / deactivate DTMF mode
Use the phone number last dialled
Disconnect and reseize the line.
Seize line ("I"),
dial phone number last dialled ("R")
Seize line ("I") and dial phone number 201
Seize line ("I"),
activate call forwarding unconditional ("*21") to phone number 201,
disconnect ("X")
Text mode has to be activated before you can enter function commands.
Advertisement
Table of Contents
