Table of Contents
Advertisement
10)
Front Panel functions (l-r)
LCD Screen
By default, the screen shows the current routing configuration on the top line and the name of
the last recalled memory on the bottom line. All other parameters and menus are shown as
they are edited.
Control Keys – Parameter selection and adjustment
NEXT key - moves forward through list of parameters.
BACK key - moves back through list of parameters.
MENU key activates the main menu – a second press selects the last menu edited – a third
press selects the last menu item. In this way, three presses on MENU from the default
screen will jump back to the last parameter adjusted.
Different menus are selected using the BACK and NEXT keys, or with the FREQ encoder.
ENTER key enters the chosen menu, confirms selections, and changes filter types when
editing parametric sections.
BYPASS will flatten the currently selected parametric sections. Note that, for safety reasons,
it is not possible to bypass the high and low pass filter sections.
QUIT exits menus back to the default screen.
FREQ, Q & GAIN (velocity sensitive encoders) adjust the relevant parameters as displayed
on the screen.
The two status LEDs indicate that AES inputs have been selected and Error.
Inputs A & B - meters show dB from clipping point of the analogue to digital converters.
All material © 2009. Martin Audio Ltd. Subject to change without notice.
Advertisement
Table of Contents
