Table of Contents
Advertisement
1)
Important Safety Information
This equipment must be earthed.
Do not expose to rain, moisture or excessive dust
No user serviceable parts inside, refer servicing to qualified service personnel.
Do not remove covers
Objects containing liquids, such as vases, must not be placed on this equipment.
Do not remove any protective earth or signal cable shield connections.
Only use this equipment with an appropriate mains cord.
In the USA the cord should comply with the requirements contained in the Standard for Cord
Sets and Power Supply Cords, UL 817, be marked VW-1, and have a current carrying
capacity not less than the marked rating of the apparatus.
2)
Electrical compliance
An example of this equipment has been tested and found to comply with the
following European and international Standards for Electromagnetic
Compatibility and Electrical Safety:
Radiated Emissions (EU):
RF Immunity (EU):
Electrical Safety (EU):
Country of origin:
3)
Unpacking the unit
After unpacking the unit, please check it carefully for any damage. If any is found,
immediately notify the carrier
concerned - you, the consignee, must instigate any claim. Please retain all packaging in case
you need to return the unit.
Please think of our environment.
When the product has reached the end of its useful life, please dispose of it
responsibly through a recycling centre.
All material © 2009. Martin Audio Ltd. Subject to change without notice.
! READ THIS FIRST !
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
EN55013-1 (1996)
EN55103-2 (1996)
RF Immunity, ESD, Burst Transient, Surge, Dips & Dwells
EN60065 (1993)
United Kingdom
!
Advertisement
Table of Contents
