Output Limiter; Output “D-Max” (Cliplim); Input Ganging And Output Ganging - Martin Audio DX1.5 Manual

Loudspeaker management system

Hide thumbs Also See for DX1.5:

Table of Contents

The display will show, for instance

OP1 Output 1 PEQ:1<>

1k00Hz Q=3.0 0.0dB

Output Limiter

The limiter on each output has adjustable attack and threshold, with a release time that is

selectable to be a multiplier of the attack time. For example, as shown below, the attack time

is 2mS and release is "x16" so 32mS.

The attack and release times can be automatically linked to the high pass filter frequency, so

that they are set to correct values for the output's frequency range. If this feature is enabled,

the display will show Automatic T/C in place of the attack and release times.

Selection of automatic time constants is through the Design a Crossover wizard, in the

Crossover Sub-Menu.

Attack

Release Threshold

The display will show, for instance

OP1 Output 1 Limiter

Atk=2.0mS Rel=x16 +22dB

Output "D-Max" (ClipLim)

The clip limiter is designed to sit at a threshold just above the standard limiter and has a look

ahead attack so that its threshold can never be exceeded. The release time can be

automatically linked to the high pass filter frequency. If this feature is enabled, the display will

show Rel. = Auto in place of the release time. Selection of automatic time constants is

through the Design a Crossover wizard, in the Crossover Sub-Menu.

Release

Threshold

The display will show, for instance

OP1 Output 1 ClipLim

Rel.=Medium 6dB Above

16)

The method of linking inputs or outputs together during editing is achieved in the same way,

so only crossover (output) ganging will be explained here. Having selected Crossover

Ganging from the menu under the Crossover Sub-Menu, the current ganging set-up will be

displayed.

Table of Contents