Ricoh Aficio GX3000 User Manual page 98

Troubleshooting
Reset Cartridge
No print cartridge has been installed. Install the print cartridge correctly.
See p.110 "Cover Open / Print Cartridge(s) Not
Dry Waiting...
The ink on the printed OHP transparency is being allowed to dry.
Waiting...
Wait a moment.
Energy Saver
The printer is in Energy Saver mode. The printer is ready for use.
Cannot use High Temp./Power Off On
The temperature is abnormally high.
Switch the printer off and then on. If the message reappears, contact your service representative.
See p.115 "Out of Printable Temperature
Cannot use Low Temp./Power Off On
The temperature is abnormally low.
Switch the printer off and then on. If the message reappears, contact your service representative.
See p.115 "Out of Printable Temperature
Resetting Job...
The printer is reinitializing a print job.
Wait a moment.
Setting change
The printer is changing its settings. Wait a moment.
Load Paper:Tray# or Form Feed
The selected tray has run out of paper.
Reload the tray. Alternately, press the [Form Feed] key, select a different tray, and then print. To cancel the print
job, press the [Job Reset] key.
See p.100 "No Paper/Tray Not Detected (Tray
Change Setting Tray #/
The size of paper in the selected tray does not match the specified paper size.
Load the tray with paper of the specified size, and then change the paper size setting for the tray on the control
panel. Alternately, press the [Form Feed] key, select a tray containing paper of the specified size, and then print.
To cancel the print job, press the [Job Reset] key.
See p.103 "Paper Size Mismatch/Paper Type Mismatch (Tray
Mismatch (Bypass
Change Settings Tray #/
The type of paper in the selected tray does not match the specified paper type.
Range".
Range".
Tray)".
Detected".
1)", p.102 "No Paper/Tray Not Detected (Bypass
1)", p.105 "Paper Size Mismatch/Paper Type
Tray)".
98