Table of Contents
Advertisement
Troubleshooting
Network Interface Board Error
An error in the network interface board network function has occurred. Do the following:
1. Turn the printer off.
2. Turn the printer on.
If the message reappears, do the following:
3. Turn the printer off.
4. Turn the network interface board's screw counterclockwise with a coin and remove the board.
5. Plug the network interface board in securely, and then secure it by turning the screw.
6. Turn the printer on.
If the message reappears, contact your service representative.
p.119 "Where to Inquire"
116
Advertisement
Table of Contents
Troubleshooting
