Table of Contents
Advertisement
Preparing for Printing
6. Make sure that the computer and printer are properly connected, and then press the [Power]
key.
Installation starts.
7. Select whether or not to open the Status monitor automatically, and then click [Next >].
8. Check the installation result, and then click [Finish].
You cannot select [Connected with USB cable] under Windows NT 4.0.
If the message "Digital Signature Not Found" or the [Found New Hardware Wizard] or [Hardware Installation] dialog box appears, see
"Notes on the Installation", Quick Installation Guide. See
If the message prompting you to restart the computer appears, restart the computer.
Confirm the printer driver is correctly installed by checking that the [Power] key of the printer is lit and performing a test print. See Quick
Installation Guide.
For details about installing User Guide only, see Setup Handbook.
p.133 "Sharing the Printer"
p.147 "If a Message Appears during
Installation".
132
Advertisement
Table of Contents
Troubleshooting
