Specifications - Denon DRA-CX3 Owner's Manual

ENGLISH

Specifications

n
Receiver section
Rated output: 2-channel driving (CD
75 W + 75 W
150 W + 150 W (4 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)
0.05 % (Rated output: –3 dB), 8 Ω/ohms, 1 kHz
High frequency distortion:
Output terminals: Speaker 4 ~ 16 Ω/ohms
Suited for headphones/stereo headphones
Equalizer amplifier output
(REC OUT terminals): Rated output : 150 mV
Input sensitivity /
Input impedance: PHONO (MM) :
PHONO (MC) :
CD, LINE1, LINE2, LINE3 : 130 mV / 47 kΩ/kohms
RIAA deviation: PHONO (MM) : 20 Hz ~ 20 kHz ±0.5 dB
PHONO (MC) : 30 Hz ~ 20 kHz ±0.5 dB
Reception frequency range: FM : 87 .5 MHz ~ 107 .9 MHz
Reception sensitivity: FM : 1.5 µV / 75 Ω/ohms
FM channel separation: 35 dB (1 kHz)
Monaural : 74 dB
FM S/N ratio:
FM harmonic distortion: Monaural : 0.3 %
n
Properties
S/N ratio: PHONO (MM) : 84 dB
PHONO (MC) : 70 dB
(A-weighted network) CD, LINE1, LINE2, LINE3 : 95 dB (input terminals short-circuited)
Tone control: BASS :
TREBLE : 10 kHz ± 8 dB
Frequency response: 5 Hz ~ 40 kHz (+0.5 dB, –3 dB) (INPUT : CD, PURE DIRECT: ON)
n
General
Power outlet: 1 switched outlet, total capacity 120 W (1 A)
Power supply: AC 120 V, 60 Hz
Power consumption: 100 W
Standby: 0.5 W or less
Maximum external dimensions: 300 (W) x 80 (H) x 341 (D) mm (11-13/16" x 3-3/16" x 13-7/16")
Weight: 5.5 kg (12 lbs 2 oz)

SP OUT)
(8 Ω/ohms, DIN, 1 kHz, T.H.D. 0.7 %)
2.5 mV / 47 kΩ/kohms
0.2 mV / 100 Ω/ohms
AM : 520 kHz ~ 1710 kHz
AM : 20 µV
Stereo : 70 dB
Stereo : 0.4 %
(With input terminals short-circuited, 5 mV input signal)
(With input terminals short-circuited, 0.5 mV input signal)
100 Hz ± 8 dB
n
Remote control unit (RC-1060)
Remote control method: Infrared pulse method
Batteries: R03/AAA Type (two batteries)
Maximum external dimensions: 44 (W) x 233 (H) x 22 (D) mm ( 1-3/4" x 9-3/16" x 7/8" )
165 g (Approx 5.8 oz) (including batteries)
Weight:
* For purposes of improvement, specifications and design are subject to change without notice.