Recording; Tuning In Radio Broadcasts; Presetting; Giving A Name To The Currently Tuned In Broadcast Station And Presetting - Denon DRA-CX3 Owner's Manual

Recording

1
FUNCTION
Press to select the input function.
CD PHONO LINE1 (iPod)
TUNER LINE3
b The function can be switched directly to "TUNER" by pressing
<PRESET> <CD>
, to "CD" by pressing .
The "iPod" indicator is displayed when a Control Dock for iPod is
z
connected. ("NO iPod" is displayed if no iPod is connected to the
Control Dock for iPod.)
2
Set the recorder to the recording mode.
b For instructions on operating, see the operating instructions of
the connected component.
3
Start playback on the player.
b For instructions on operating, see the operating instructions of
the connected component.
• The LINE3 input signal is not output to the recording output terminal
(REC).
• Adjusting the volume or tone does not affect the sound being
recorded.

Tuning in radio broadcasts

1
[TUNER]
Press
"TUNER".
The reception frequency is displayed.
LINE2
2 BAND]
Press [
FM AUTO
3
TUNING]
Press [
The "TUNED" indicator lights when a station is tuned in.
n
FM station reception conditions
• When the reception band mode is set to "FM AUTO" , the "ST"
indicator lights when a stereo broadcast is tuned in.
• If the signal is weak and the stereo broadcast reception is not
stable, set the reception mode to "FM MONO" . The "MONO"
indicator lights.
n
Auto tuning
Press and hold in
the next stereo broadcast automatically.
Stations cannot be tuned in if the signal is too weak.
n
Canceling auto tuning
<PRESET>
Press
n
Manual tuning
The frequency changes one step at a time each time
pressed.
Noise may be produced in the sound when receiving AM broadcasts if
there is e.g. a TV nearby. If so, move the DRA-CX3 and TV as far apart
as possible.
<PRESET> <FUNCTION>
, or to select
to select the reception band.
FM MONO AM
to select the reception frequency.
<PRESET> [TUNING
or ] to search for and tune in
[TUNING]
or .
[TUNING]

Presetting

Giving a name to the currently tuned in
broadcast station and presetting it
• A total of 40 FM and AM broadcast stations combined can be
preset.
• Preset stations can be given names of up to 8 characters.
1
Tune in the broadcast station.
The reception frequency is displayed.
2
[EDIT]
Press .
The name input mode is set.
3
[CHANNEL]
Press to select the desired character.
b Up to 8 characters can be input for each preset.
The characters that can be input are as shown below.
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
0         
^ ' ( ) * + , – . / = (space)
[TUNING]
b Press to move the cursor.
[CLEAR]
b Press to delete characters.
4 [ENTER]
Press .
is
The name input mode is set.
5
[CHANNEL]
Press to select the preset number, then
[ENTER]
press .
The reception frequency and reception mode are preset.
n To change the name of a preset station:
q Call out the preset name to be changed, then press
3 4
w Perform steps , under "Giving a name to the currently tuned
in broadcast station and presetting it" .
n To only preset the station:
[ENTER]
q Press while the station is tuned in.
5
w Perform step under "Giving a name to the currently tuned in
broadcast station and presetting it" .
NOTE
If a station is preset at a number where a station has already been
preset, the old setting is deleted and replaced with the new setting.
ENGLISH
[EDIT]
.
0