Operation; Turning The Power; Conducting Playback; Adjusting The Tone - Denon DRA-CX3 Owner's Manual

ENGLISH
<ON/STANDBY / OFF> VOLUME
POWER
[POWER]
MODE
iPod
EDIT
[TUNING]
MENU /
[ENTER] SET TU CLEAR
[CHANNEL] CH ENTER CH
TONE TU BAND
[TONE]
[TUNING]
CD TUNER PHONO
FUNCTION LINE 1 /
iPod LINE 2 LINE 3
PURE
TIME DIRECT
VOLUME
MUTE DIMMER
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit


Operation

FUNCTION
Turning the power on
<ON/STANDBY / OFF>
Press
b W hen the power is turned on, the function that was being used
when the power was last turned off is selected (Last function
<CD> <PRESET>
memory).
n
Setting the power to the standby mode:
[POWER]
Press
n
Canceling the standby mode:
[POWER]
Press
n Turning the power off:
[EDIT]
<ON/STANDBY / OFF>
Press
[CLEAR]
[CHANNEL]
Power indicator
[BAND]
Power on ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Red
[TUNER]

Conducting playback

1
FUNCTION
Press
[PURE DIRECT]
CD
TUNER
b The function can be switched directly to "TUNER" by pressing
<PRESET>
, to "CD" by pressing
The "iPod" indicator is displayed when a Control Dock for iPod is
z
connected. ("NO iPod" is displayed if no iPod is connected to the
Control Dock for iPod.)
2
Start playback on the selected component.
b For instructions on operating, see the operating instructions of
the connected component.
.
.
again.
.
Standby ∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙∙ Orange
to select the input function.
PHONO LINE1 (iPod)
LINE3 LINE2
<CD>
.
3
VOLUME
Adjust the .
b The volume can be adjusted within the range 0 to −90 dB to −∞.
When set to −∞, the display reads "- -.- dB" .

Adjusting the tone

1
[TONE]
Press to select the tone parameter to be
adjusted.
BASS TREBLE BALANCE
INPUT
BASS: Adjusts the bass sound.
TREBLE: Adjusts the treble sound.
BALANCE: Adjusts the left/right volume balance.
2
When the bass or treble level or the balance is
[CHANNEL]
displayed, adjust pressing
Playing with higher quality sound
(Pure Direct mode)
[PURE DIRECT]
Press .
The display is turned off.
b The audio signals do not pass through the tone adjustment
circuitry, so highly pure sound is played.
n
Canceling the Pure Direct mode:
[PURE DIRECT]
Press again.
When in the pure direct mode, the tone is set to "flat" and the balance
to "center" . The tone and balance cannot be adjusted when this mode
is selected.
.