Presetting Broadcast Stations Automatically (Auto Preset); Listening To Preset Broadcast Stations; Ipod ® Playback - Denon DRA-CX3 Owner's Manual

ENGLISH
POWER
[iPod ]
1 MODE
iPod
EDIT
MENU /
SET TU CLEAR
[MENU/SET]
[CHANNEL] CH ENTER CH
TONE TU BAND
CD TUNER PHONO
LINE 1 /
[LINE1/iPod]
iPod LINE 2 LINE 3
PURE
TIME DIRECT
MUTE DIMMER
About the button names in these explanations
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only:
Buttons on the main unit and remote control unit

Presetting broadcast stations automatically
<FUNCTION> (Auto preset)
1
[TUNER]
Press
"TUNER".
The reception frequency is displayed.
2
Press and hold [
"A. PRESET" is displayed.
<PRESET>
3 MENU/SET]
Press [
Broadcast stations are preset automatically.
• Broadcast stations whose signals are too weak cannot be preset
automatically. To preset them, tune them in manually, then follow
the operation described at "Giving a name to the currently tuned in
[MODE]
broadcast station and presetting it" .
• Once auto presetting starts, it cannot be stopped before it is
completed. (It takes about 60 seconds for auto presetting to be
completed.)
[CHANNEL]

Listening to preset broadcast stations

[TUNER]
Select the preset number by pressing <
[CHANNEL]
.
iPod ® playback
The music on an iPod can be played by using the Control Dock for iPod
(ASD-1R, sold separately).
The iPod can be controlled using the buttons on the main unit and the
remote control unit.
b The iPod may only be used to copy or play contents that are not
copyrighted or contents for which copying or playback is legally
permitted for your private use as an individual. Be sure to comply
with applicable copyright legislation.
<PRESET> <FUNCTION>
, or to select
MENU/SET]
.
.
PRESET
iPod is a trademark of Apple Inc., registered in the
U.S. and other countries.
1
Connect the DRA-CX3 and iPod using the Control
Dock for iPod (ASD-1R) (vpage 7).
2
[LINE1/iPod]
Press or <
"LINE1".
The display switches from "LINE1" to "iPod" .
3 [MODE]
Press for 2 seconds or more to select the play
mode.
Browse
Browse:
Displays menu or track information on the display of the main unit.
("DENON" is displayed on the iPod display.)
Remote:
Displays menu or track information on the iPod display.
("iPod" is displayed on the display of the main unit.)
b Select the remote mode to enjoy iPod video information such as
slide shows and videos.
4 [iPod 1]
Press .
b When pressed again, the pause mode is set.
> or
For remote control unit buttons that can be used when the function is
set to "iPod" , see page 4.
NOTE
• DENON will accept no responsibility whatsoever for possible loss of
iPod data when using an iPod connected to the DRA-CX3.
• Depending on the type of iPod and the software version, some
functions may not operate.
FUNCTION>
to select
Remote