Manual Tuning; Preset Stations; Checking The Preset Stations; Recalling Preset Stations - Denon AVR-886 Operating Instructions Manual

ENGLISH
Basic Operation
FUNCTION BAND PRESET
SHIFT

Manual tuning

1
Set the input source to "TUNER".
2
Watching the display, press the
select the desired band (AM or FM).
3
MODE
Press the button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns off.
4
TUNING
Press the (+) or (–) button to tune in
the desired station.
The frequency changes continuously when the button is
held in.
• When the manual tuning mode is set, FM stereo broadcasts are
received in monaural and the "STEREO" indicator turns off.
STATUS
TUNING

Preset stations

1
Use the "Auto tuning" or "Manual tuning"
operation to tune in the station to be preset in
the memory.
BAND
button to
2
Press the
3
Press the
memory block (A to G).
4
Press the
desired preset channel (1 to 8).
5
Press the
• Store the station in the preset memory.
• To preset other channels, repeat steps 1 to 4.
A total of 56 broadcast stations can be preset — 8 stations
(channels 1 to 8) in each of blocks A to G.
TUNING
TUNER
BAND
PRESET
MEMORY
MODE SHIFT
ON SCREEN
MEMORY
button.
SHIFT
button and select the desired
PRESET
(+) or (–) button to select the
MEMORY
button again.
31
ENGLISH

Checking the preset stations

The preset (broadcast) stations can be checked on the on screen
display.
ON SCREEN
Press the button repeatedly until the
"Tuner Preset Stations" screen appears on the OSD.

Recalling preset stations

1
Watching the display, press the
select the preset memory block.
2
Watching the display, press the
ª ª
(–) button to select the desired preset channel.
Basic Operation
SHIFT
button to
PRESET •
(+) or