Dsp Surround Simulation - Denon AVR-886 Operating Instructions Manual

ENGLISH
Basic Operation
SURROUND MODE
SURROUND PARAMETER

DSP surround simulation

2 To operate the surround mode and the surround
parameters from the remote control unit
1
Select the surround mode for the input channel.
(Remote control unit)
The surround mode switches in the following order each
time the DSP SIMULATION button is pressed:
MONO MOVIE ROCK ARENA
MATRIX VIDEO GAME
2
SURROUND PARAMETER
Press the
enter the surround parameter setting mode.
The surround parameter switches in the following order
each time the SURROUND PARAMETER button is pressed for
the different surround modes.
SURROUND
MODE
ENTER
CURSOR
SELECT
3
Press the
press the
various parameters.
4
Press the
parameter settings.
5
Press the
parameter mode.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
JAZZ CLUB
button to
SURROUND
PARAMETER
SURROUND PARAMETER
button, and
CURSOR D D H H
or button to select the
CURSOR F F G G
or button to adjust the
ENTER
button to finish the surround
27
ENGLISH
2 Operating the surround mode and the surround
parameters from the main unit's panel
1
SELECT
Turn the knob to select the surround
mode.
When turned clockwise:
DIRECT STEREO DOLBY PRO LOGIC
MONO MOVIE 5CH/7CH STEREO
ROCK ARENA JAZZ CLUB VIDEO GAME
VIRTUAL SURROUND MATRIX
When turned counterclockwise:
DIRECT STEREO DOLBY PRO LOGIC
MONO MOVIE 5CH/7CH STEREO
ROCK ARENA JAZZ CLUB VIDEO GAME
VIRTUAL SURROUND MATRIX
To select the surround mode while adjusting the surround
parameters, tone defeat or tone control, press the
SURROUND MODE button, then operate the selector.
2
SURROUND PARAMETER
Press and hold in the
button to select the parameter you want to set.
The parameters which can be set differ for the different
surround modes are displayed. (Refer to "Surround modes
and parameters" ( page 60).)
3
Display the parameter you want to adjust, then
SELECT
turn the knob to set it.
• When making parameter settings, the display will return to the
regular condition several seconds after the last button was
pressed and the setting will be completed.
Basic Operation
II
x
DTS NEO:6
II x
DTS NEO:6