Channel Level; Listening To The Radio; Auto Preset Memory - Denon AVR-486 Operating Instructions Manual

Av surround receiver
Hide thumbs Also See for AVR-486:
Table of Contents

Advertisement

ENGLISH
Basic Operation
CH SELECT
CURSOR F

Channel Level

You can adjust the channel level either according to the playback
sources or to suit your taste, as described below.
1
CH SELECT
Press the
button to select the speaker
whose level you want to adjust.
The channel switches as shown below each time the button
is pressed.
FL
C
FR
SW
SL
SBL
When the surround back speaker setting is set to "1sp" for
"Speaker Configuration", this is set to "SB".
"SB" appears only when the "Power Amp Assign." setting
is the surround back mode.
2
CURSOR F F
Press the
or
level of the selected speaker.
The default setting of the channel level is 0 dB.
The level of the selected speaker can be adjusted within the
range of +12 to –12 dB by pressing the CURSOR buttons.
The SW channel level can be turned off by decreasing it one
step from –12 dB.
OFF ´ –12 dB ´ +12 dB
INPUT SELECTOR
CURSOR G
ON/STANDBY

Listening to the radio

Auto preset memory

This unit is equipped with a function for automatically searching
for FM broadcast stations and storing them in the preset
memory.
Hold the
switch on the main unit.
• The unit automatically begins searching for FM broadcast
SR
stations.
SBR
When the first FM broadcast station is found, that station is
stored in the preset memory at channel A1.
Subsequent stations are automatically stored in order at
preset channels A1 to A8, B1 to B8, C1 to C8, D1 to D8, E1
to E8, F1 to F8 and G1 to G8 for a maximum of 56 stations.
Channel A1 is tuned in after the auto preset memory
G G
button to adjust the
operation is completed.
• If an FM station cannot be preset automatically due to poor
reception, use the "Manual tuning" operation to tune in the
station, then preset it using the manual "Preset memory"
operation.
• To interrupt this function, press the ON/STANDBY switch.
PRESET
POWER
SHIFT
BAND
TUNING
PRESET •
POWER
button and press the
29
ENGLISH
TUNER
MODE
MEMORY
2 DEFAULT SETTINGS
Auto tuner presets
87.5 / 89.1 / 98.1 / 107.9 / 90.1 / 90.1 /
A1 ~ A8
90.1 / 90.1 MHz
520 / 600 / 1000 / 1400 / 1500 / 1710 kHz,
B1 ~ B8
90.1 / 90.1 MHz
C1 ~ C8
90.1 MHz
D1 ~ D8
90.1 MHz
E1 ~ E8
90.1 MHz
F1 ~ F8
90.1 MHz
G1 ~ G8
90.1 MHz
Basic Operation
TUNING
PRESET
SHIFT
BAND

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Avr-486sDht-486dvDht-486xp

Table of Contents