Connecting The Multi Zone Terminals; Zone2 Speaker Out Connections - Denon AVR-486 Operating Instructions Manual

ENGLISH
Connecting Other Sources
2 AM loop antenna assembly
Connect to the AM
antenna terminals.
1 2
Remove the vinyl tie
Bend in the reverse
and take out the
direction.
connection line.
4
a. Antenna placed on
a stable surface.
Mount
b. Hanging the
antenna on a wall.
Use the
installation hole to secure the antenna to a wall, etc.

Connecting the MULTI ZONE terminals

For instructions on operations using the MULTI ZONE functions (
Connection of AM antennas
3
1. Push the lever.
2. Insert the conductor.
3. Return the lever.
page 35, 36).

ZONE2 speaker out connections

• When the power amplifier is assigned to the ZONE2 output channel at "Power Amp
Assignment", the surround back speaker terminals can be used as the ZONE2 speaker out
terminals ( page 35).
• The connections diagram below is an example for when the surround back speaker is assigned
to the ZONE2 stereo 2 channel.
In this case, surround back speaker out can not be used for MAIN ZONE.
Subwoofer
IN
Connection terminal
for subwoofer with
built-in amplifier
(subwoofer), etc.
( L ) ( R )
< > > <
Front speaker
systems (B)
11
ENGLISH
Connecting Other Sources
Center Surround speaker
speaker systems
( L )
> < >
> <
( L )
( L ) ( R )
< > > <
>
Front speaker ZONE2 speaker
systems (A) systems
NOTE:
• The settings must be
changed to use this
speaker for ZONE2
( page 16).
( R )
<
( R )
< > <