System Setup Items And Default Values - Denon AVR-486 Operating Instructions Manual

ENGLISH
System Setup
System setup items and default values (set upon shipment from the factory)
System Setup
Input the combination of speakers in your system and their
corresponding sizes (SMALL for regular speakers, LARGE
Speaker
1 for full-size, full-range) to automatically set the composition
Configuration
of the signals output from the speakers and the frequency
response.
This parameter is for optimizing the timing with which the
2 Delay Time audio signals are produced from the speakers and
subwoofer according to the listening position.
Subwoofer This selects the subwoofer speaker for playing deep bass
3
Mode signals.
Crossover Sets the frequency (Hz) below which the bass sound of
4
Frequency the various speakers is to be output from the subwoofer.
This adjusts the volume of the signals output from the
5 Test Tone speakers and subwoofer for the different channels in order
to obtain optimum effects.
Digital In This assigns the digital input terminals for the
6
Assignment different input sources.
Auto
7 Surround Auto surround mode function setting.
Mode
Ext. In SW
8 Sets the Ext. In Subwoofer channel playback level.
Level
Power Amp Sets this to switch the surround back channel's power
9
Assignment amplifier for ZONE2 use.
Default settings
Front Sp. Center Sp. Subwoofer
Large Small Yes
Front
Center Subwoofer
L & R
12 ft 12 ft 12 ft
Subwoofer mode = Normal
80 Hz
Front
Center Subwoofer
L & R
0 dB 0 dB 0 dB
Input
CD AUX
source
Digital
COAXIAL1 COAXIAL2
Inputs
Auto Surround Mode = ON
Ext. In SW Level = +15 dB
Surround Back
17
ENGLISH
Page
Surround Back
Surround Sp.
Sp.
12, 13
Small Small / 2sp
Surround Surround Back
L & R L & R
13, 14
10 ft 10 ft
14
14
Surround Surround Back
L & R L & R
15
0 dB 0 dB
DVD / VDP
16
OPTICAL
16
16
16
System Setup