Multi Zone Music Entertainment System; Remote Control Unit Operations During; Multi-Source Playback - Denon AVR-486 Operating Instructions Manual

ENGLISH
Advanced Operation

Multi zone music entertainment system

ZONE2 speaker out can be used when "ZONE2" is selected at "Power Amp Assignment". In this case, surround back speaker out
cannot be used for MAIN ZONE.
• For instructions on installation and operation of separately sold devices, refer to the devices' operating instructions.
2 When using the SURR.BACK/ZONE2 amplifier as the ZONE2
• To use the ZONE2, turn on the ZONE2 button.
• The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit's ZONE2 VOLUME button.
• The input source selected with the INPUT SELECTOR knob is output for the ZONE2 speaker output.
[System configuration and connections example]
Using this unit's internal amplifier as the ZONE2.
MAIN ZONE 5.1-channel systems
Monitor
FL
This unit
DVD player
B
Input
SL
: SPEAKER cable
Refer to "Connections" ( page 11).
FR
C
SW
ZONE2 SPEAKER OUT
SR
SYSTEM REMOTE
CONTROL UNIT RC-1001
This is only possible when the main unit in the ZONE2 mode
(
ZONE2
1
2
3
4
35
ENGLISH
Advanced Operation
ZONE2 OFF
ZONE2 ON
CHANNEL
MODE 1 MODE 2
VOLUME

Remote control unit operations during

multi-source playback (selecting the source)
page 16).
MODE 1
Set the switch to the "AUDIO".
MODE 2
Set the switch to the "ZONE2".
ZONE2 ON
Press the button.
To cancel the ZONE2 mode:
Press the ZONE2 OFF button.
The output level of the ZONE2 SPEAKER OUT
terminals can be controlled pressing the
VOLUME
button on the remote control unit.
Default setting (ZONE2 VOLUME LEVEL):
– – – dB (MINIMUM)