Advanced Operation; Remote Control Unit; Operating Denon Audio Components - Denon AVR-486 Operating Instructions Manual

ENGLISH

Advanced Operation

OFF
NUMBER
MODE 1

Remote control unit

Operating DENON audio components

1
MODE 1
Set the switch to "AUDIO".
2
MODE 2
Set the switch to the position for the
component to be operated (CD, CDR/MD or
TAPE).
3
Operate the audio component.
For details, refer to the component's operating instructions.
While this remote control is compatible with a wide range of
infrared controlled components, it may be the case that some
component models cannot be operated with this remote
control.
1. CD player (CD), CD recorder and MD recorder (CDR/MD)
ON/SOURCE
system buttons
MODE 2
,
6 7
2
1
,
8 9
3
DISC SKIP + : Switch discs (for CD changers only)
2. Tape deck (TAPE) system buttons
6
7
2
1
0
A/B
: Manual search (forward and reverse)
: Stop
: Play
: Auto search (cue)
: Pause
: Rewind
: Fast-forward
: Stop
: Forward play
: Reverse play
: Switch between decks A and B
31
ENGLISH
3. Tuner system buttons
SHIFT : Switch preset channel range
CHANNEL +, – : Preset channel up/down
TUNING +, – : Frequency up/down
BAND : Switch between the AM and FM bands
MODE : Switch between auto and mono
MEMORY : Preset memory
• TUNER can be operated when the switch is at "AUDIO" position.
Advanced Operation