Checking The Currently Playing Program Source, Etc; Switching The Brightness Of The Display; Selecting The Play Mode (Pure Direct); Setting The Tone Control - Denon DRA-697CI Operating Instructions Manual

ENGLISH
Operation
FUNCTION MODE <PRESET>
BAND SHIFT TUNING
<ON/STANDBY> PURE DIRECT <LOUDNESS>
MEMORY <TONE DEFEAT>
SHIFT
[FM/AM]
ENTER
MENU
STATUS
PURE DIRECT
[NUMBER]
(0 ~ 9, +10)
BAND
[MEMORY BLOCK]
FUNCTION
About the button names in this explanation
< > : Buttons on the main unit
[ ] : Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Checking the currently playing program source,
MENU ENTER
etc.
<SELECT>
STATUS
STATUS
Press
• The current program source and various settings are indicated on
the display.

Switching the brightness of the display

[DIMMER]
Press
<CH VOL>
<TONE CONTROL> The brightness of the display can be adjusted in three steps. The
display can also be turned off.

Selecting the play mode (PURE DIRECT)

[CHANNEL]
This mode reproduces the sound with extremely high quality. The
FUNCTION
display that could affect the audio signals are turned "OFF".
PURE DIRECT
Press
[DIMMER]
[VIDEO SELECT]

Setting the tone control

¢ Adjusting the tone
1
Press
"TREBLE".
2 < SELECT >
Use
Can be adjusted within the range of –10 dB to +10 dB.
MODE
MEMORY
TUNING
.
.
.
< TONE CONTROL >
to select "BASS" or
to set the level.
13
ENGLISH
¢ When you do not want to adjust the tone
< TONE DEFEAT >
Press to select "TONE DEFEAT ON".
¢ When listening with the volume turned low
< LOUDNESS >
Press to select "LOUDNESS ON".

Adjusting the speaker volume

1 < CH VOL >
Press to select the speaker.
The settable speaker switches each time this button is pressed.
< SELECT >
2
Use to adjust the volume.
Can be adjusted within the range of –12 dB to +12 dB.
Combining the currently playing sound with the
desired image (VIDEO SELECT function)
[VIDEO SELECT]
Press until the desired image appears
on the display.
• To cancel, press [VIDEO SELECT] to select "SOURCE".
• The video source selected with the video select function is stored in
the memory for the different input sources.
Operation