Chapter 4: Setup Troubleshooting; Troubleshooting Checklist - Lexmark 15L0000 - Z 705 Photo Jetprinter Color Inkjet Printer User Manual

4
Setup troubleshooting

Troubleshooting checklist

Is the power supply firmly attached to your printer and a properly grounded electrical outlet?
Are both your printer and computer on? If you are using your printer on a network, make
sure your computer is connected to the network, your Lexmark adapter is on, and all
indicator lights are on. For more information, refer to the adapter documentation.
Is your USB cable securely attached to your printer and to your computer or Lexmark
adapter?
Are the printer lights blinking? If they are, see "Understanding error messages and flashing
lights" on page 49.
Did you remove the sticker and transparent tape from the back and bottom of each print
cartridge?
Did you install the print cartridges correctly? For help, see "Install the cartridges" on
page 39.
Is the paper loaded correctly? Make sure you do not push the paper too far into the printer.
If the Paper Feed light is blinking, see "Understanding error messages and flashing lights"
on page 49.
Did you install the printer software correctly?
Open the printer utility by double-clicking the Z700-P700 Series Printer folder on
your desktop, and then double-clicking Z700-P700 Series Utility. You can also
access the Z700-P700 Series Utility from Printer Services in the Print dialog menu.
If the printer folder and the printer utility are not found, relaunch the printer software.
For help, see "Installing the printer software" on page 47.
Setup troubleshooting
45