When I Insert The Printer Software Cd, Nothing Happens - Lexmark 15L0000 - Z 705 Photo Jetprinter Color Inkjet Printer User Manual

Is the printer set as the default or current printer?
To make sure that your printer is set as the default printer:
1 From the Dock, click the Print Center icon.
The Printer List dialog appears.
Note: If the Print Center icon is not on the Dock, from the Finder window choose
2 Make sure that the Z700-P700 Series is highlighted in the list.
To make sure that your printer is set as the current printer:
1 With your document open, choose File
2 From the Format for pop-up menu, choose Z700-P700 Series.
3 Click OK.
4 Choose File
5 From the Printer pop-up menu, choose Z700-P700 Series.
Is your printer directly connected to your computer? If it is connected through an external
device such as a USB hub, switch box, scanner, or fax machine, follow these corrective
steps:
1
Disconnect your printer from any external devices.
2
Connect your printer directly to your computer with a USB cable.
3
Print a test page.
a Open the printer utility by double-clicking the Z700-P700 Series Printer folder
on your desktop, and then double-clicking Z700-P700 Series Utility. You can
also access the Z700-P700 Series Utility from Printer Services in the Print dialog
menu.
b From the Cartridges tab, click Print Test Page.
•
•

When I insert the printer software CD, nothing happens

1
Close all open software programs.
2
Remove the printer software CD.
When I insert the printer software CD, nothing happens
Go Applications
Print.
If the test page prints, the printer is working properly. The initial problem may
be due to your external devices, not your printer. Check the documentation
that comes with your external devices for help.
If the test page does not print, refer to the printer software Help for further
troubleshooting information. See also "Test page does not print" on page 52.
Utilities Print Center.
Page Setup.
46