POSITION/DIRECTION CALIBRATION
When driving, the current vehicle position
mark will be automatically corrected by GPS
signals. If GPS reception is poor due to loca-
tion, you can manually adjust the current ve-
hicle position mark.
1. Touch "Position/Direction".
2. Touch the eight directional touch−
screen button to move the cursor
desired point on the map.
3. Touch "Enter".
4. Touch either
or
rection of the current vehicle position
mark.
5. Touch "Enter".
The map screen will be displayed.
to the
TIRE CHANGE CALIBRATION
The tire change calibration function will be
used when replacing the tires. This function
will adjust the miscalculation caused by the
circumference difference between the old
and new tires. If this procedure is not per-
formed when the tires are replaced, the cur-
rent vehicle position mark may be incorrectly
displayed.
to adjust the di-
To perform a distance calibration proce-
dure, touch "Tire Change" on the "Cal-
ibration" screen.
The message appears and the quick distance
calibration is automatically started. A few
seconds later, a map screen will be displayed.
ADVANCED FUNCTIONS
89