Table of Contents
Advertisement
118
3-3. Adjusting the seats
Driving position mem-
*
ory
*
: If equipped
This feature automatically
adjusts the driver's seat, out-
side rear view mirrors and
head-up display to suit your
preferences.
Two different driving positions
can be recorded into memory.
Each electronic key can be
registered to recall your pre-
ferred driving position.
Recording a driving position
into memory
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
3
Adjust the driver's seat, outside
rear view mirrors and head-up
display to the desired positions.
4
While pressing the "SET" but-
ton, or within 3 seconds after the
"SET" button is pressed, press
button "1" or "2" until the buzzer
sounds.
If the selected button has already been
preset, the previously recorded position
will be overwritten.
■
Seat positions that can be memo-
rized
The adjusted positions other than the
position adjusted by lumbar support
switch can be recorded.
■
In order to correctly use the driving
position memory function
If a seat position is already in the fur-
thest possible position and the seat is
operated in the same direction, the
recorded position may be slightly differ-
ent when it is recalled.
WARNING
■
Seat adjustment caution
Take care during seat adjustment so
that the seat does not strike the rear
passenger or squeeze your body
against the steering wheel.
Recalling a driving position
1
Check that the shift lever is in P.
2
Turn the engine switch to ON.
Advertisement
Table of Contents
