Starting The Engine (With Key Cylinder−Type Ignition Switch); Starting The Engine (With Smart Key System); Push Button Start Function - Toyota CAMRY 2007 Owner's Manual

(b) Starting the engine
(with key cylinder−type
ignition switch)
Before starting the engine, be sure to fol-
low the instructions in "(a) Before crank-
ing".
Normal starting procedure
The multiport fuel injection system/sequen-
tial multiport fuel injection system in your
engine automatically controls the proper
air−fuel mixture for starting. You can start
a cold or hot engine as follows:
With your foot off the accelerator pedal,
crank the engine by turning the key to
"START". Release it when the engine
starts.
Engine should be warmed up by driving,
not in idle. For warming up, drive with
smoothly turning engine until engine cool-
ant temperature is within normal range.
If the engine stalls...
Simply restart it, using the correct proce-
dure given in normal starting.
If the engine will not start...
See "If your vehicle will not start" on page
336 in Section 4.
'07Camry_U (L/O 0601)
NOTICE
z Do not crank for more than 30 se-
conds at a time. This may overheat
the starter and wiring systems.
z Do not race a cold engine.
z If the engine becomes difficult to
start or stalls frequently, have the
engine checked immediately.
(b) Starting the engine
(with smart key system)

PUSH BUTTON START FUNCTION

The engine can be started by pressing the
"ENGINE START STOP" switch.
Before starting the engine, be sure to fol-
low the instructions in "(a) Before crank-
ing".
Normal starting procedure
The multiport fuel injection system/sequen-
tial multiport fuel injection system in your
engine automatically controls the proper
air−fuel mixture for starting.
You can start a cold or hot engine as
follows:
When the key is in the vehicle (on your
person), it is possible to start the engine.
2007 CAMRY from Jan. '06 Prod. (OM33669U)
317