Channel Category; Presetting A Channel; Selecting A Channel - Toyota CAMRY 2007 Owner's Manual

AUDIO SYSTEM

Channel category

Touch either "TYPE:" or "TYPED" to go to
the next or previous category.
160

Presetting a channel

1. Tune in the desired channel.
2. Touch one of the channel selector but-
tons (1 — 6) and hold it until a beep is
heard.
This sets the channel to the touch−screen
button and the name and number of the chan-
nel appears on the touch−screen button.
Each touch−screen button can store three
SAT channels. To change the preset channel
to a different one, follow the same procedure.
The preset channel memory is cancelled
when the power source is interrupted by bat-
tery disconnection or a blown fuse.

Selecting a channel

Tune in the desired channel using one of the
following methods.
Preset tuning: Touch the channel selector
button (1 — 6) for the channel you want. The
button (1 — 6) is highlighted and channel
number appears on the display.
To select channel within the current cate-
gory: Push the " " or " " button of
"SEEK·TRACK". The radio will step up or
down the channel within the current channel
category. Touch "TYPE SEEK". The radio
will step up the channel within the current
channel category.