Network - GE Security DIGIA II User Manual

16 Digia II
User Manual

Network

The Network submenu has three of its own submenus. They are Network configuration, Network email, and
Network DDNS.
Network configuration
Figure 10 shows the Network configuration submenu.
Figure 10. Network configuration
Table 6. Network configuration submenu
Menu item
Data port
HTTP port
Control port
Client access
Bandwidth saving
Network type
IP
Subnet mask
Digia II Menu - Network
<< Network Configuration
Data Port
HTTP Port
Control Port
Client Access
Bandwidth Saving
Network type
IP Address
Subnet Mask
Gateway
DNS Server
Description
Default is 00554.
Default is 00080.
Default is 01600.
Check this box if you want to enable access to the Digia II over a network.
Default is 8192 KB. Select between 10 and 8192 KB. This limits the
bandwidth for the network stream.
Choose between Static and DHCP. DHCP will assign values to the IP,
subnet, gateway, and DNS server values automatically.
The IP address of the unit. If you choose static as a network type, you can
set the IP address by highlighting the number you want to change, hit
Enter, and then use the up and down arrow to change the values. Hit
Enter again to set the number, then use the left or right arrows to move to
another position and repeat to change that number.
The subnet mask of the unit. If you choose static as a network type, you
can set the subnet mask the same way as you set the IP address.
>>
00554
00080
01600
8192
DHCP
000.000.000.000
000.000.000.000
000.000.000.000
168.095.001.001