GE Security DIGIA II User Manual page 13

Playback status bar. The playback status bar appears when you enable the OSD (onscreen display) in the Display
menu. There are three parts to this display bar, which are:
• Record date - Displays the date when the video was recorded.
• P01 - Displays that video is currently playing back from the hard drive.
• Percentage - Displays the location on the hard drive where the video was recorded.
C
• Playback status - Displays the direction and speed of playback. Pause means the video is paused. > means
normal playback speed. < means normal reverse playback speed. >> x N means N times fast playback speed.
<< x N means N times fast reverse playback speed. ||>> means forward slowmotion playback. <<|| means
reverse slowmotion playback.
• Record time - Displays the time when the video was recorded.
Record status bar. The record status bar appears when you enable the OSD (onscreen display) in the Display menu.
There are three parts which are:
• Current date - The current date.
• Record status - Shows R01, which means its recording the video feed to the hard drive.
D
• Percentage - Displays the amount of hard drive remaining.
• HDD/Fan status - Shows No Disk if no disk is installed, and/or No Fan if the cooling fan stops working.
• Current time - The current time.
Chapter 1 5
Introduction